MIS Capacitors
The SemiGen 8000 and 8100 series of MIS Capacitors are available in a wide variety of capacitance ranges and sizes. They are made with prime starting material and consist of an Oxide/Nitride layer that provides low dielectric loss and high standoff voltage. These RF microwave chip capacitor products are available in chip form only.
8100 Series Capacitors, Working Voltage >100V
| Capacitance Range | Chip Size (±.002”) Dim A x Dim B x Dim C |
Type |
|---|---|---|
| 0.1 pf thru 1.9 pf | .010" x .010" x .005" | 810R1 thru 811R9 |
| 2.0 pf thru 9.9 pf | .015" x .015" x .005" | 812R0 thru 819R9 |
| 10.0 pf thru 29.0 pf | .020" x .020" x.006" | 8110R thru 8129R |
| 30.0 pf thru 49.0 pf | .030" x .030" x.006" | 8130R thru 8149R |
| 50.0 pf thru 99.0 pf | .040" x .040" x .008" | 8150R thru 8199R |
| 100 pf thru 199 pf | .050" x .050" x .008" | 81100 thru 81199 |
| 200 pf thru 399 pf | .070" x .070" x.008" | 81200 thru 81399 |
8000 Series Capacitors, Working Voltage >50V
| Capacitance Range | Chip Size (±.002”) Dim A x Dim B x Dim C |
Type |
|---|---|---|
| 2.0 pf thru 9.9 pf | .010" x .010" x .005" | 802R0 thru 809R9 |
| 10.0 pf thru 29.0 pf | .015" x .015" x .005" | 8010R thru 8029R |
| 30.0 pf thru 49.0 pf | .020" x .020" x.006" | 8030R thru 8049R |
| 50.0 pf thru 99.0 pf | .030" x .030" x.006" | 8050R thru 8099R |
| 100 pf thru 199 pf | .040" x .040" x .008" | 80100 thru 80199 |
| 200 pf thru 399 pf | .050" x .050" x .008" | 80200 thru 80399 |
| 400 pf thru 600 pf | .070" x .070" x.008" | 80400 thru 80600 |
Tolerance Table
| Tolerance + | |
|---|---|
| A = .05 pF | G = 2% |
| B = .1 pF | J = 5% |
| C = .25 pF | K = 10% |
| D = .5 pF | M = 20% |
| F = 1% | |
| Standard Tolerance is +10% | |
| Maximum Ratings | |
|---|---|
| Parameters | Rating |
| Operating Temperature | -55° C to +150° C |
| Storage Temperature | -65° C to +200° C |
| Temperature Coefficient | 190 ppm/°C Max 40 ppm/°C typical |
| Voltage Breakdown | Varies according |
Features:
- Very High Q
- Low Temperature Coefficients
- Low Dissipation Factor
- Long-Term Stability
- Gold Contacts Front and Back
- Die as Thin as 3 mils for Limiting Inductance
Applications:
For use in applications that require DC protection, RF bypassing or fixed tuning of amplifiers, oscillators, switches, filters and multipliers.
HOW TO ORDER:
- Go to 8100 Series chart.
Select capacitance range required.
Check CHIP size for compatibility with your circuit. - Go to 8000 Series chart for smaller chip size with lower working voltage.
- Specify part number and chip size at time of order.
Downloads:
